How Do Pigs Perform B-ultrasound Detection

The B-ultrasound for pigs uses the probe to emit high-frequency ultrasound through the piezoelectric effect to generate echoes through the body tissue. The echoes can be received by the transducer and converted into high-frequency electrical signals, which are then transmitted to the host. A scientific imaging diagnosis technology of the cutaway sonogram of the part under investigation is a scientific method for carrying out cross-section observation of a living body without any damage and stimulation.

Instrument operation:

1. Before use, check whether the instrument is normal, and fill in the records correctly and timely before and after use. Exporting pictures should use special computers to prevent viruses from pouring in, and portable instruments should save pictures in time.

2. Turn on the B ultrasound instrument and adjust the contrast, gray scale and gain to suit the local light intensity at the time and the vision of the detector.

3. Put the probe on the probe and place it in the detection area so that the ultrasonic emission surface is in close contact with the skin. Adjust the front and back position and incident angle of the probe to find the dark area of the bladder first. Look for a uterine or ovarian section above the top of the bladder.

4. After using the B-ultrasound, make sure the probe is clean and charged in time.

Related Readingļ¼šThe Harm Of Destroying Balanced Production

B-ultrasound