Maintenance Of Ice Making Machines

Maintenance Of Ice Making Machines

Ice machine is mainly used to produce ice, so its ice efficiency and function far beyond the ordinary refrigerator frozen effect. Ice maker in the production of ice in the process of high hardness, low freezing point, it is not easy to melt. In the production of cold drinks when the ice is really very help. Commercial ice machine maintenance: the usual use of commercial ice machine and water quality has a great relationship, if the water a lot of impurities or water quality is hard, a long time will be in the evaporator on the ice plate to leave a lot of scale, Scale will affect the ice-making time and effectiveness, increase the energy consumption of ice-making machine, affecting the normal business.

1, Ice to the back of the machine and the left and right side of the gap is not less than 30cm, the top gap is not less than 60cm,

2, The ice machine should be installed away from the heat source, no direct sunlight, well ventilated place, the ambient temperature should not exceed 35 ℃, to prevent the ambient temperature is too high lead to poor condenser cooling, ice effect. The floor of the ice maker should be solid and the ice machine must be level, otherwise it will cause no ice and no noise during operation.

3, The ice machine should use an independent power supply, power supply and equipped with a fuse and leakage protection switch, but also a reliable grounding.

4, Ice machine water pipes, sinks, storage refrigerators and protective film to be cleaned once every two months.

5, Ice machine water to meet the national drinking water standards, and the installation of water filtration device, filter impurities in the water, so as not to plug the water pipes, pollution sink and ice mold. And affect the ice making performance.

6, Cleaning the ice machine should turn off the power, is strictly prohibited with water pipes directly on the fuselage, the application of neutral detergent scrub, is strictly prohibited with acidic, alkaline and other corrosive solvents.

7, The ice machine is not used, should be cleaned, and dry hair with a hair dryer and the box of water, free of corrosive gases and dry place, to avoid open storage

8, The ice machine must clean the condenser surface every two months, dust, condensation, heat dissipation will cause damage to the compressor parts. Cleaning, the use of vacuum cleaners, small brushes and other cleaning condensate surface dust, can not use sharp metal tools to clean, so as not to damage the condenser.

9, The ice machine must be two months to unscrew the water hose tube head, clean the water inlet filter, to avoid the water sludge mud plugging the inlet, and cause the water into the smaller, resulting in ice.

10, The general use of ice machine maximum ambient temperature does not exceed 39 ℃, the minimum use of the ambient temperature of not less than 3 ℃, the water temperature does not exceed 30 ℃.